Welcome to Downloads for DeltaPix Cameras

  
DeltaPix InSight software 2.3.3" 32 bit version Dongle Required (works 12 times with old dongle)

DeltaPix InSight software 2.3.3" 64 bit version Dongle Required (works 12 times with old dongle)

  • JPEG save issue fixed
  • Remap intensity and undo added
  • Save/load annotations added
  • Polyruler problem fixed
  • Improved directshow integration
  • Manual and autostitching improved
  • Save of live images and measurments added
  • Online manual added
  • RGB48 mode addded for most CCD cameras
  • Readback of Prior joystick position
  • Support for Invenio IIS cameras added
  • Various improvements and small bugs fixed
DeltaPix InSight software 2.0.1" Dongle Required (works 12 times with old dongle)
  • Calibration functions improved
  • Z-motor control added
  • Automatic segmentation and counting added
  • some bugs corrected
  • Prior interface added
  • XY control with scanning and autostitching added
  • Live measuments to single file
DpxView Pro Software Release 1.14.9" Dongle Required (works for 8 hours without dongle!)

  • UnZip to a directory of your choice and run the exe file. No need to uninstall old versions.
  • Various improvements and bugs fixed.

 

DpxView Pro Software Release 1.14.8" Dongle Required (works for 8 hours without dongle!)

  • Run the file and it will automatically install the new release. No need to uninstall old versions.
  • DPXView LE will also be installed automatically (no dongle required)
  • Released 24.03.2009
  • color correction toolbar could not be seen on low res. monitors. Corrected.
  • Improved stitching both automatic and manual
  • Improved performance when switching between multiple cameras connected at the same time
  • Saving of workspace now also works on Vista computers. NOTE:OLD WORKSPACE PROFILES CAN NOT BE LOADED!!.
  • Problems with center to center measurement of circles fixed
  • Problems with thick scale bar fixed
  • Improved automatic autostitching with motorized XY stages
  • Support for PRIOR PRO-SCAN controllers
  • Video capture now works also with Invenio 5D
  • Various improvements and bugs fixed.

 

DpxView Pro Software Release 1.14.7" Dongle Required (works for 8 hours without dongle!)

  • Run the file and it will automatically install the new release. No need to uninstall old versions.
  • DPXView LE will also be installed automatically (no dongle required)
  • Released 13.01.2009
  • Improved stitching both automatic and manual
  • Improved performance when switching between multiple cameras connected at the same time
  • Saving of workspace now also works on Vista computers. NOTE:OLD WORKSPACE PROFILES CAN NOT BE LOADED!!.
  • Problems with center to center measurement of circles fixed
  • Problems with thick scale bar fixed
  • Improved automatic autostitching with motorized XY stages
  • Support for PRIOR PRO-SCAN controllers
  • Video capture now works also with Invenio 5D
  • Various improvements and bugs fixed.

 

DpxView Pro Software Release 1.14.5" Dongle Required (works for 8 hours without dongle!)

  • Run the file and it will automatically install the new release. No need to uninstall old versions.
  • DPXView LE will also be installed automatically (no dongle required)
  • Released 14.12.2008
  • Support for multiple Invenio, DP and Infinity X cameras on one computer.
  • Works with Windows Vista.
  • Improved drivers for Invenio cameras
  • Improved automatic autostitching with motorized XY stages
  • Center to center measurement on circles
  • Various improvements and bugs fixed.
DpxView Pro Software Release 1.13.5" Dongle Required (works for 8 hours without dongle!)

  • Run the file and it will automatically install the new release. No need to uninstall old versions.
  • DPXView LE will also be installed automatically (no dongle required)
  • Released 3.10.2008
  • Support for multiple Invenio, DP and Infinity X cameras on one computer.
  • Works with Windows Vista.
  • Improved calibration bar and magnification control. Calibration possible in high res mode with Infinity X and X-32 cameras.
  • Automatic autostitching with motorized XY stages
  • Integration to Prior XYZ stages and controller.
  • Measurement units selectable



Last Edited 01-09-2010